The best and most accurate way
to determine ring size is to have your finger professionally
measured with a ring in the same millimeter (mm) width as the
ring you are considering purchasing. Many of our customers have
found that trying on wedding bands in different widths is the
easiest way to determine their exact ring size.
Some customers have also found the above ring sizer to be a
helpful guide to determining ring size. In order to print the
ring sizer on this page, be sure that your printer is set to
100%. In other words, make sure that you have not reduced the
print size in 'page set up.' You can verify that the sizer
printed correctly by measuring it with a ruler; it should
measure from left to right: 3 3/8 inches.
Once you have printed the sizer,
you may cut it out and use it or try the following directions to
find your ring size:
- Wrap a piece of loose
string around your finger. Be sure to allow for the size of
your knuckle.
- With a pen, mark the point
on the string where the end meets.
- Using the chart, place the
end of the string on the left hand line next to the letter
"A" and stretch the string along the sizer toward the
numbers.
- The pen mark on your
string should line up with a number to indicate your ring
size.
Below is a chart of ring sizes for the convenience of our
international customers:
